# 1
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
Strong and seems to be well made and well finished. One-inch ball mounting hole. I used this for a Curt hitch mounted on a 2014 Forester and pulls a small Harbor Freight trailer. Perfect height and trailer is level. Warning - don't get their hitch pin, it does not have a hole for a cotter pin, only a weak clip that I would not trust.
# 2
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
Working in the sand and grass of my driveway my wife and I installed our new etrailer receiver hitch. Great fit and finish! Went right on as described in the online guide. Hitch required a spacer washer on top back bolt attachment point. Taped it on so it would not move while lifting in place and it stayed right there! Used a car jack to raise up and hold the hitch into the underside of the trunk tighten the bolts and reattached the tail pipe done. Now we can pull our Sunfish Sailboat any where the car will go.
# 3
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs
Longer stinger let me drop the tailgate on my Tacoma with trailer attached. Replaced a similar but shorter Curt hitch and both are very substantial and well made for the weight of my trailer.
With good information from the website it was easy to order a Curt 2" Trailer Hitch, the Upgraded Circuit Protected Tail Light Converter Hardwire Kit w/ 4-Pole Connector and Circuit Tester - 119178KIT, Curt Ball Mount for 2" Hitches (3/4" Rise, 2" Drop - 10-1/4" Long - 7,500 lbs - D-4), Curt Pin and Clip Hitch Receiver - C21500, Rubber Tube Cover for 2" Trailer Hitch Receivers - I-728,Review, and 2" hitch ball 40038. Parts were delivered earlier than the initial estimate. Self installation (on a sloped drive way) took just under 2 hour. The fit of parts was very good, instructions and on-line video's were very helpful. My Kia did not have the wire plug in option, but the splice connections in the wire kit were easy to install. Most of the parts are hidden from view when the ball mount is not used.
# 4
Curt Multi-Ball Adjustable Ball Mount for 2" Trailer Hitches
Picked up my teardrop in ABQ on 2/17/23, and the Curt ball mount lined up perfectly with no drop/rise, and the extra length gave clearance for my rear door mounted spare tire. This mount is a beast, and the "overbuilt" nature of it gave me confidence that my Bronco would tow the teardrop easily. I also got the Curt Echo wireless brake controller, which synced easily to my phone and was easy to install, set up, and use. Overall a great towing experience, thanks to etrailer and Curt!
Works great used for 3 different trailer we have handy it's heavy well made.
# 5
Curt Ball Mount w/ Sway Control Tab for 2" Hitches - 3/4" Rise, 2" Drop - 7,500 lbs
I cannot use this ball mount because the shaft is too short that goes into hitch receiver on my one ton Dodge truck. It does not allow enough room between truck back bumper and ball to allow any trailer tongue to be put on ball.
Purchased this hitch as a companion for our Reese anti sway control. The small ball for the Reese sway control fits in the bracket and the 2” drop on the hitch is exactly what we needed to have our Jayco camper level when towing.
# 6
Ball Mount 3/4" Rise or 2" Drop - 12-5/8" Long
Allows me to open the tailgate on the truck with a trailer hitched up.
Ball mount is the perfect length and well made.
# 7
Convert-A-Ball Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 10,000 lbs
Makes for a great hard-core dirt road set up with a 3000 pound trailer, in conjunction with the Curt rocker ball, Towing with an F150 over many miles of washboards, down through washes where the road was washed out, etc. Really makes for a gentler set up on the equipment in the trailer and the truck. Thanks a lot E-trailer!
My usage of your hitch is a bit unusual, I think. I pull a two ton roller with my Ram and I've used your cushioned hitch to smooth out the process. The roller Lunette just dropped over a 2" ball and then banged and jerked on the ball neck. Check out the photos for my adaptation.. I can flip it over and use the 2" ball! Have enclosed some photos. The cushion is holding up very well and it takes a beating!! Thanks
# 8
Rapid Hitch Adjustable, Aluminum Ball Mount Kit w/ 2 Zinc Balls - 5-1/2" Drop
I pay to receive the product in good condition, my hitch ended up being damaged, I don't know what type of packaging this was, they are supposedly a waoooo site, I ask for my return label and my refund, I
Works flawlessly. I was very excited the day I got home and my Rapid hitch was on the front porch. It came in nice box and was packaged very well. I opened it up and unpacked my rapid hitch and I was very impressed with the quality and precision of this hitch. All of the machining was PERFECT and everything fit together right. I put it in my truck right away. Going down the road with the trailer on and off there is absolutely no rattles, clunks, or jolts. I also love how everything is aluminum or stainless steel, NO RUST. I wish I could've gotten the greaseless model but my boat is too heavy. My only complaint is that it doesn't come with locking pins. With a hitch this expensive I really wish it came with them. Do yourself a favor and order them with your rapid hitch so you don't have to pay for shipping in the future. Other than that great product and I believe it will outlast me.
# 9
Draw-Tite Ball Mount for 2" Hitch - 7" Rise, 8" Drop - 9-1/2" Long - 12,000 lbs
Heavy Duty Drop Down Hitch no problem pulling a 10,000# trailer
It fits perfect on my f350 diesel, super heavy duty. I'll be using it for towing my car tilt bed trailer.
# 10
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 3/4" Rise, 2" Drop - 7.5K
There were some UPS delivery issues, damaged in shipment. But, etrailer.com jumped right on sending out another shipment after it was apparent that UPS would not complete the delivery. The installation took longer, maybe 1-1/2 hours, because I did not have all my tools ready and I was working on the concrete floor in the dark to outside with a portable shop light. Everything fit well and it looks great. The 2" drop ball mount was the perfect height for my 2019 Toyota Highlander Hybrid. I love the look of the Curt black insert that makes the hitch looks like it belongs on the car, nothing embarrassing at all. Anything negative? Maybe. The flat plate was a little difficult to hook onto with the UHaul safety chains on a 5x8 trailer. That's hardly a negative, though, and I wouldn't have spent more on another brand choice because of this. Happy happy!
Great fit and finish on this kit. So nice to be able to tow things with my Forester now. I thought I had an issue but figured out it was user error pretty quick, but only after I contacted etrailer for help. I heard back within 30 minutes of emailing and by that time I figured out my blunder. They were extremely helpful and responsive and were set on fixing the problem I thought I had. I have used etrailer for several different purchases over the past couple years and every time I have been thrilled with the service and the quality of product.
# 11
MaxxTow Ball Mount w/ 2" Accessory Receiver - 2" Hitches - 2-1/4" Drop - 5,000 lbs
Heavy duty , very good quality.
# 12
MaxxTow Tri-Ball Mount for 2" Hitches - Hollow, Black Powder Coated Shank - Chrome Balls
Good quality part. Easy Install. Used for a year so far. No problems.
Great Hitch, reasonably priced
# 13
MaxxTow Adjustable-Height Ball Mount - 2" Hitch - 7-1/2" Drop, 6-1/4" Rise - 5,000 lb
As advertised and quick delivery, I am an Etrailer fan!
Strong and works perfectly!
# 14
Curt Towing Starter Kit for 2" Hitches - 2" Ball - 2" Rise, 4" Drop - 7.5K
Nice combination to go with my front hitch for the F150.
dodge journey 2014 etrailer service excellent the hitch don't fit perfect with the spare tire other ways is pretty good if you tele out the spare tire you going to have a hard time to put them back etrailer sevicio es excelente la pieza no se acopla perfecto con la rueda de repuesto del resto se monta perfecto . si se retira la rueda de repuesto es muy dificil de poner de vuelta en el compartimento
# 15
B&W Tow & Stow 3-Ball Mount - 2-1/2" Hitch - 4-1/2" Drop/Rise - 18K - Black
Super beefy and very well made. Packed well too. Some careful thought and enginnering went into this piece and you can tell. Im old enough to remember being able to buy high quality, locally made stuff for a reasonable price. Seems like those days are mostly gone. It was fun to inbox this hitch and appreciative the solid craftsmanship. Doesn’t happen too much anymore.
Great product arrived on time , item was very well packaged. I buy from etrailer because of the excellent customer service. Fits my ram dually very well. Looks good too
# 16
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
Its been a year and I aint broke it yet. I use this hitch to tow my 7Klb trailer. The trailer is tongue heavy and I needed something rugged to tow it with. Haven't had any troubles with this hitch.
This ball mount fit the SUV just right. I needed a 5 inch rise and the mount angled away from the bumper. However, the load capacity was way more than I needed, but the fit made up for that. It's a little loose in the receiver so I will be adding a stabalizer to lock it in place.
# 17
Curt Multi-Ball Mount for 2" Hitches - Solid, Black Powder Coated Shank - Black Balls
Weights a ton. Seems very strong...10,000 pounds using the 2 5/16s balls. Good paint.
Functionally, this hitch has been great with no issues to date. Aesthetically, the black color did quickly fade to a gray color within a couple of months. Ball surface also presented rust after very minimal use. That being said, I did buy a hitch to tow trailers, not look pretty.
# 18
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 7.5K - Black
This is the cats meow! I love how I can put multiple balls on one tow bar but in addition to adjusting the tow bar height to meet different trailer heights.
Looks Great! Love the way it stows away, don't have to worry about banging my leg on my hitch anymore.
# 19
Curt Tri-Ball Mount - 3 Chrome Balls - 10,000 lbs
definitely solid as a rock
Excellent product! With the three different ball sizes, this tri-ball mount gives you a lot of flexibility. Gone are the days of having several different ball mounts to fit different tongues. High quality construction makes this an excellent investment.
# 20
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
Still haven't towed anything with it yet but it seems very solid. I do think it will rattle some in the receiver because it is loose in my 2" receiver on my 2019 F150.
This hitch has worked out great for me over the last year. It’s very heavy duty and easy to adjust. I’ve hauled a 9,000 lb boat, long-distance on numerous occasions without issue. I also haul a landscape trailer on a daily basis weighing over 5,000lbs and haven’t had a single issue. Great hitch that was significantly cheaper than others and is very high quality. I’ve recommended it to several people and I wouldn’t hesitate to buy again. The only thing I would like to have now in a hitch is a tongue weight gauge, but it isn’t necessary.
Draw-Tite Ball Mount Review - 2003 Dodge Dakota
Today on our 2003 Dodge Dakota we'll be test fitting the draw-tite ball mount with a 3/4-inch rise or 2-inch drop rated at 7,500 pounds, part number 2923. Before we begin our test fit, we will firstly obtain the hitch height of our vehicle which is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 15-1/4 inches. Keep in mind this measurement may vary due to tire size, hitch style or after market accessories. We'll now begin our test fit by sliding the shank of the ball mount in the drop position into the opening of the hitch and securing with the pin and clip. We'll then measure from the ground to the top of the ball platform, and we'll get a measurement of about 12-3/4 inches. If your vehicle's hitch height matches our's and your trailer's ride height matches this measurement this should be an appropriate ball mount for you. We can now flip the ball mount over to the rise position and again measure from the ground to the top of the ball platform, and we'll get a measurement of about 16 inches. Once again if your trailer's ride height matches this measurement, this would be an appropriate ball mount for you. That will complete today's test fit for the draw-tite ball mount with a 3/4-inch rise or a 2-inch drop rated at 7,500 pounds, part number 2923 on our 2003 Dodge Dakota.
Convert-A-Ball Pintle Mounting Bar Review - 2003 Dodge Dakota
Today on our 2003 Dodge Dakota, we'll be test fitting the Convert-a-Ball cushioned adjustable pintle mounting bar for 2-inch hitches rated at 10,000 pounds, part number AMPC2. Before we begin our test fit we will firstly obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 15-1/4 inches. Keep in mind this measurement may vary due to tire size, hitch style or after market accessories. We'll now begin our test fit by sliding the shank of the mounting bar into the opening of the hitch and securing it with the pin and clip. You can use this in the drop or the rise position. We'll start off in the drop. Now from the ground to the center of the bottom set of holes is 9-3/4 inches. We can now flip it over into the rise position and we'll then measure from the ground to the center of the top set of holes, and we'll get a measurement of about 18-1/2 inches. If your vehicle's hitch height matches ours and your trailers ride height is on or in between these two sets of measurements, this should be an appropriate pintle mounting bar for you. That will complete today's test fit for the Convert-a-Ball cushioned adjustable pintle mounting bar for 2-inch hitches, part number AMPC2 on our 2003 Dodge Dakota.
Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2003 Dodge Dakota
Today, on our 2003 Dodge Dakota, we'll be test-fitting the Convert-A-Ball Cushion Ball Mount, for two-inch hitches, with a three quarter inch rise or two-inch drop, rated at 10,000 pounds, part number AMSC2. Before I begin our test-fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is fifteen and one quarters inches. Keep in mind, this measurement may vary due to tire size, hitch style, or aftermarket accessories. We'll begin our test-fit by sliding the shank of the ball mount, in the drop position, into the opening of the hitch and securing it with the pin and clip. We'll then need to measure from the ground to the top of the ball platform, and we'll get a measurement of about thirteen and one quarters inches.
MaxxTow Ball Mount Review - 2003 Dodge Dakota
Today on our 2003 Dodge Dakota, we'll be test fitting the Maxxtow Ball Mount with a two inch accessory receiver for two inch hitches, rated at 5000 pounds, part number mt70066. Before we begin our test fit we will first need to obtain the hitch height of our vehicle which is the measurement from the ground to the inside of the receiver tube. The hitch height for this vehicle is 15 1/4 inches. Keep in mind that this measurement may vary due to tire size, hitch style or after market accessories. We'll now begin our test fit by sliding the shank of our ball mount into the opening of the hitch and securing it with a pin and clip. Now, this ball mount is a great way for you to carry your hitch mounted bike rack or cargo carrier while towing your boat or small utility trailer. Note, that the hitchpin or and clip are sold separately.
Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2003 Dodge Dakota
Today, on our 2003 Dodge Dakota, we'll be test fitting the Convert-a-Ball Cushion Ball Mount for 2" hitches with a 1" rise or 2" drop, rated at 14,000 pounds part number AMSC2HD. Before I being our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for this vehicle is 15 1/4". Keep in mindthis measurement may vary due to tire size, hitch style, or after market accessories. We'll now being our test fit by sliding the shank of the ball,in the drop position,into the opening of the hitch and then secure it with the pin and clip.
What our customers are saying:
"Thanks for your rapid response and the follow up info. It was a pleasure ordering and following up."